WOD Orbital Valve Mount
WA121068
The WOD Orbital Valve Mount provides a strong, weld-ready foundation for mounting a hydraulic steering orbital in custom off-road and full-hydraulic steering systems. Precision laser cut from 1/4" high-strength steel, this mount can be welded directly into a chassis structure or suspended from compatible 1.75" tubing to create a rigid, secure steering valve installation.
Designed for rock crawlers, rock bouncers, Ultra4 cars, trail buggies, and custom tube chassis builds, this orbital valve mounting plate gives fabricators the flexibility to position the steering control unit for proper driver ergonomics, hose routing, protection, and service access. The unfinished steel construction can be trimmed, gusseted, or incorporated into a larger steering column assembly as required by the build.
Includes:
- (1) WOD Orbital Valve Mount
Important: This is a weld-ready fabrication component. Welding, additional support structure, mounting hardware, and final fitment are required.
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Wide Open Design |
| Product Type | Orbital Steering Valve Mount |
| Material | 1/4" High-Strength Plate Steel |
| Manufacturing | Precision Laser Cut |
| Mounting Style | Weld-On / Tube-Hung |
| Tube Compatibility | Designed for Integration with 1.75" Chassis Tubing |
| Steering System Type | Full Hydraulic Steering |
| Condition | Unfinished and Weld-Ready |
| Mounting Hardware Included | No |
| Welding Required | Yes |
| Country of Origin | Made in USA |
Fitment
Universal Fitment for Custom Full-Hydraulic Steering Systems
Compatible Applications:
- Hydraulic orbital steering valves
- PSC orbital valves
- Charlynn-style steering control units
- Custom full-hydraulic steering systems
- Rock crawlers
- Rock bouncers
- Ultra4 race cars
- Trail buggies
- Custom tube chassis vehicles
Common Mounting Locations:
- 1.75" chassis tubing
- Dash bars
- Steering towers
- Vertical chassis braces
- Custom steering column structures
- Firewall or front bulkhead support assemblies
Fitment Notes:
- Verify the orbital valve bolt pattern and body clearance before final welding.
- Position the valve so the steering shaft remains properly aligned and supported.
- Confirm adequate clearance for hydraulic fittings, hoses, and service tools.
- Keep pressure and return hoses clear of exhaust heat, sharp edges, suspension movement, and rotating components.
- Cycle the steering system from lock to lock before finalizing hose routing.
- Additional tubing, gussets, mounting hardware, steering shaft components, and support brackets may be required.
- Welding should be completed by an experienced fabricator.
FAQ
What does an orbital steering valve do?
An orbital valve, also called a steering control unit, directs hydraulic fluid to the steering cylinder based on steering wheel input. In a full-hydraulic system, it replaces the mechanical connection normally found between the steering wheel and steering gearbox.
Why is orbital valve mounting important?
The orbital must be mounted rigidly so steering input remains consistent and the valve does not flex under load. A weak or poorly supported mount can create movement at the steering wheel, place stress on hydraulic fittings, and contribute to premature component wear.
Can this mount be welded to round tubing?
Yes. The mount is designed to be incorporated into custom chassis fabrication and can be suspended from compatible 1.75" tubing or tied into other properly supported chassis structures.
Why should hose routing be considered before welding?
Orbital valves typically require multiple hydraulic connections, including pressure, return, and cylinder work ports. Mocking up the fittings and hoses before final welding helps prevent tight bends, hose interference, inaccessible connections, and heat-related routing problems.
Should the orbital valve be mounted inside the passenger compartment?
Placement depends on the complete vehicle design. Many builders position the valve outside or away from the primary occupant area to reduce the amount of high-pressure hydraulic plumbing near the driver and passengers while maintaining a direct, supported steering shaft path.
Can this mount be modified?
Yes. The 1/4" steel plate can be trimmed, drilled, gusseted, or incorporated into a larger custom steering structure. Any modification should preserve adequate material around the mounting holes and maintain sufficient support for steering loads.
Does this include an orbital valve or steering column?
No. This listing includes only the weld-ready orbital valve mounting plate. The orbital valve, hydraulic fittings, hoses, steering shaft, support bearings, mounting hardware, and related steering components are sold separately.
What should be checked before final welding?
Confirm steering wheel position, shaft alignment, orbital bolt pattern, fitting access, hose routing, chassis clearance, and driver ergonomics. The complete steering assembly should be mocked up before the mount is permanently welded into the chassis.
