WOD Small Front Axle Truss Link Tab
F021083
The Small Front Axle Truss Link Tab provides a compact, repeatable mounting point for suspension links on a front axle truss. Its lower mounting height makes it well suited for applications where clearance is limited or a lower link angle is required. It can be paired with short, medium, or Large Front Truss Link Tabs to fine-tune suspension geometry for custom off-road builds.
Each tab is precision laser cut from 1/4" high-strength plate steel for consistent dimensions, clean edges, and a weld-ready finish. This eliminates the time and inconsistency of hand-cut brackets while providing a professional mounting solution for rock crawlers, bouncers, linked trail rigs, and custom suspension systems.
Includes:
- (1) Small Front Axle Truss Link Tab
Note: Two tabs are required to mount one suspension link.
Specifications
| Specification | Details |
|---|---|
| Part Number | F021083 |
| Product Type | Front Truss Suspension Link Tab |
| Material | 1/4" High-Strength Plate Steel |
| Overall Length | 4.875" Including Overlap |
| Base to Hole Center | 1.750" |
| Hole Diameter | 1/2" |
| Manufacturing Method | Precision Laser Cut |
| Installation | Weld-On |
| Condition | Weld-Ready |
| Compatible Tabs | Short, Medium, or Long Truss Link Tabs |
| Quantity Required Per Link | 2 Tabs |
| Country of Origin | Made in the USA |
Fitment
Universal Weld-On Fitment
- Front axle trusses
- Custom linked suspension systems
- Rock crawlers
- Rock bouncers
- Ultra4 race vehicles
- Trail rigs
- Tube chassis and custom fabrication projects
Fitment Notes:
- Two tabs are required to mount one suspension link.
- Best suited for tighter-clearance applications or lower mounting positions.
- Can be paired with different-height truss tabs to adjust link angle and separation.
- Verify joint width, bolt size, suspension geometry, and truss clearance before final welding.
- Professional welding is recommended for structural suspension applications.
| Feature | Small Front Truss Link Tab | Large Front Truss Link Tab |
|---|---|---|
| Part Number | F021083 | F021058 |
| Material | 1/4" High-Strength Plate Steel | 1/4" High-Strength Plate Steel |
| Overall Length | 4.875" Including Overlap | 5.375" Including Overlap |
| Base to Hole Center | 1.750" | 2.250" |
| Hole Diameter | 1/2" | 1/2" |
| Manufacturing Method | Laser Cut | Laser Cut |
| Condition | Weld-Ready | Weld-Ready |
| Best Use | Lower Link Angle or Tight Clearance | Higher Link Angle or Increased Separation |
| Quantity Required Per Link | 2 Tabs | 2 Tabs |
| Made in USA | Yes | Yes |
Tech Insight
The small tab places the suspension joint 1.750" above the mounting base, making it a better choice where clearance is limited or where a lower link angle is needed at the axle. The extended overlap provides additional weld contact area for strength and helps create a more stable mounting point on the truss.
Pairing different-height tabs allows builders to fine-tune suspension geometry, including link angle, separation, anti-dive, anti-squat, and clearance around the differential housing or steering components. Both tabs must maintain proper bolt alignment and joint clearance, and the suspension should be fully cycled before final welding.
