WOD Chromoly Rod End - 7/8"-14 Shank, 3/4" Bore
XMR12-14
The WOD 7/8"-14 Chromoly Rod End is built for suspension, steering, chassis, and linkage applications that require increased strength, fatigue resistance, and dependable articulation. Featuring a 7/8"-14 shank and 3/4" bore, it is an excellent choice for four-link suspensions, ladder bars, steering systems, and custom fabrication projects using common 3/4" mounting hardware.
Manufactured from heat-treated chromoly steel with a hardened 52100 bearing steel ball and a self-lubricating Nylon/PTFE race, this rod end delivers smooth movement with minimal maintenance. With a 55,692 lb radial static load rating, it provides the strength required for demanding rock crawlers, race vehicles, high-performance off-road builds, and industrial linkage systems.
Note: Verify thread direction, mounting width, bolt size, and required articulation before ordering. Jam nuts, misalignment spacers, mounting hardware, and threaded bungs are sold separately unless otherwise noted.
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Wide Open Design |
| Product Type | Chromoly Rod End / Heim Joint |
| Shank Thread Size | 7/8"-14 |
| Bore Size | 3/4" |
| Body Material | Heat-Treated Chromoly Steel |
| Ball Material | Heat-Treated 52100 Bearing Steel |
| Ball Finish | Hard Chrome Plated and Precision Ground |
| Race Material | Nylon/PTFE |
| Race Type | Self-Lubricating and Self-Sealing |
| Body Protection | Corrosion-Resistant Protective Coating |
| Radial Static Load Rating | 55,692 lbs |
| Maintenance | No Routine Greasing Required |
The stated radial static load rating applies to the rod end under a controlled static radial test. It does not represent the safe working capacity of the complete suspension or linkage system.
Fitment
Universal Fitment
Common Applications:
- Front and rear four-link suspension systems
- Ladder bars
- Steering linkages
- Chassis braces and supports
- Custom suspension fabrication
- Rock crawlers and rock bouncers
- Trail rigs and off-road buggies
- Race and performance vehicles
- Industrial linkage systems
Fitment Notes:
- Designed for compatible 7/8"-14 threaded bungs, suspension links, or machined components.
- The 3/4" bore is intended for compatible 3/4" mounting hardware or properly sized misalignment spacers.
- Verify left-hand or right-hand thread requirements before ordering.
- Confirm bracket width and spacer dimensions before installation.
- Maintain adequate thread engagement inside the threaded bung or suspension link.
- Use a properly matched jam nut to secure the final adjustment.
- Cycle the suspension or linkage through its full range of movement to check for binding.
- Do not allow the rod end body or shank to contact the mounting brackets during articulation.
- Mounting hardware, jam nuts, threaded bungs, and misalignment spacers are sold separately unless otherwise noted.
FAQ
Why use a 7/8"-14 shank with a 3/4" bore?
This combination provides increased shank strength and resistance to bending while retaining compatibility with common 3/4" suspension hardware. It is a strong upgrade for heavier vehicles, larger tires, and high-load suspension systems without requiring oversized mounting bolts.
What is the benefit of a chromoly rod end?
Heat-treated chromoly steel provides increased strength and fatigue resistance compared with many standard mild-steel rod ends. This makes it better suited for suspension, steering, chassis, and linkage applications exposed to repeated impacts and vibration.
What does the Nylon/PTFE race do?
The Nylon/PTFE race creates a low-friction surface between the ball and rod end body. It supports smooth articulation while helping reduce wear, noise, contamination, and routine maintenance.
Does this rod end require greasing?
No routine greasing is required. The Nylon/PTFE race is self-lubricating and self-sealing, although regular inspection for wear, looseness, contamination, corrosion, or physical damage is still recommended.
What does the 55,692 lb radial static load rating mean?
Radial static load measures force applied perpendicular to the rod end bore during a controlled static test. It does not account for repeated impacts, fatigue, side loading, bending, loose hardware, or improper suspension geometry.
Can the radial static load rating be used as the suspension's working load?
No. The complete connection is limited by its weakest component, including the rod end shank, mounting bolt, spacers, brackets, threaded bung, welds, suspension link, and chassis structure. Proper engineering and an appropriate safety factor are required.
How much thread engagement should be maintained?
The rod end should retain substantial thread engagement inside the threaded bung or link at its final adjustment position. Avoid operating the joint near the end of the threads, where the shank is more vulnerable to bending and thread damage.
When should misalignment spacers be used?
Misalignment spacers are used when additional angular travel, a narrower installed width, or a different mounting bolt size is required. The spacers must match the rod end bore, mounting hardware, and bracket spacing.
How do I prevent rod end binding?
Mock up the complete suspension or linkage and cycle it through its full operating range. The ball must retain adequate angular movement without the rod end body or shank contacting the mounting brackets.
