RRP6100 Two-Person Race Intercom Kit - Rugged Radios RACE SERIES - Product image 1
RRP6100 Two-Person Race Intercom Kit - Rugged Radios RACE SERIES - Product image 2
RRP6100 Two-Person Race Intercom Kit - Rugged Radios RACE SERIES - Product image 3
RRP6100 Two-Person Race Intercom Kit - Rugged Radios RACE SERIES - Product image 4
RRP6100 Two-Person Race Intercom Kit - Rugged Radios RACE SERIES - Product image 5
RRP6100 Two-Person Race Intercom Kit - Rugged Radios RACE SERIES - Product image 1
RRP6100 Two-Person Race Intercom Kit - Rugged Radios RACE SERIES - Product image 2
RRP6100 Two-Person Race Intercom Kit - Rugged Radios RACE SERIES - Product image 3
RRP6100 Two-Person Race Intercom Kit - Rugged Radios RACE SERIES - Product image 4
RRP6100 Two-Person Race Intercom Kit - Rugged Radios RACE SERIES - Product image 5

RRP6100 Two-Person Race Intercom Kit - Rugged Radios RACE SERIES

6100-2P-RACE-NO-DSP

$774.00
/
Shipping calculated at checkout.

Select Your DSP Option

The Rugged Radios RACE SERIES RRP6100 Two-Person Race Intercom Kit provides two-person in-car communication for a race vehicle where the driver and co-driver need to hear each other through compatible helmet or headset equipment. It suits a cockpit where one person concentrates on driving while the other manages course notes, navigation, or connected radio traffic.

Separate volume controls allow different listening levels for the two seats. The driver-isolate switch routes radio communications to the co-driver when selected, while switchable side tone changes how the crew hears its own microphones. The optional installed DSP version adds speech processing. Plan the matching helmet equipment, intercom wiring, and any radio or GPS adapters separately around the connections listed below.

Includes:

  • RRP6100 two-person race intercom kit
  • Installed DSP chips only with the selected DSP option
Specifications
Part Number 6100-2P-RACE-NO-DSP
6100-2P-RACE-DSP-INSTALL
Product Type Race Kits
Primary Application Two-person race or prerunner intercom installations; Crew communication with supported helmet or headset wiring
Manufacturer / brand Rugged Radios
Users Two-person system
Controls Independent volumes; side tone; driver isolation
Expansion Rear AUX port; separate adapters/jumpers
Select Your DSP Option No - Don't Install DSP Chips; Yes - Install DSP Chips
Fitment

Common Uses:

  • Two-person race or prerunner intercom installations
  • Crew communication with supported helmet or headset wiring

Fitment Notes:

Requires compatible communication wiring, helmet equipment, and any radio-interface jumper needed for the installation.

FAQs

Can I add radio or GPS audio?

The intercom supports radio and rear-AUX connections, but the required adapters and jumper cables are separate.

Can I adjust each seat separately?

Yes. Independent controls allow different listening volumes for the driver and co-driver.

Why choose the DSP option?

The optional installed Digital Speech Processor chips add speech processing intended to reduce background noise in the intercom audio.

What connections or fitment does this require?

Requires compatible communication wiring, helmet equipment, and any radio-interface jumper needed for the installation.

What is supplied with this listing?

RRP6100 two-person race intercom kit; Installed DSP chips only with the selected DSP option.

Related Products

Back to Communications & Radios