Winters Park Safety Switch Kit for SideWinder Shifters
1089
The Winters Park Safety Switch Kit is designed to prevent engine cranking unless the shifter is in Park, adding an important layer of starting protection to compatible Winters SideWinder automatic shifters. By interrupting the starter control circuit when the shifter is outside the Park position, this safety switch helps prevent accidental in-gear starts in rock crawlers, rock bouncers, Ultra4 race cars, and custom off-road buggies.
Designed for compatible Winters and Art Carr automatic shifter assemblies, the Park Safety Switch integrates into the vehicle's starter circuit and operates through the shifter's Park position. Its straightforward installation makes it a practical safety upgrade for high-horsepower off-road vehicles where positive gear selection and controlled starting are essential. Proper switch adjustment and wiring are required for reliable operation.
Includes:
- (1) Winters Park Safety Switch
- Mounting Hardware
Important: This switch is designed to permit engine cranking only when the compatible shifter is in Park. Verify shifter compatibility and follow the manufacturer's wiring instructions before installation. Wiring terminals may vary by kit configuration.
Specifications
| Manufacturer | Winters Performance |
|---|---|
| Product Type | Park Safety Switch Kit |
| Switch Function | Starter Circuit Interlock |
| Starting Position | Park Only |
| Operation | Shifter Position-Activated Electrical Switch |
| Shifter Compatibility | Compatible Winters SideWinder Automatic Shifters |
| Additional Compatibility | Select Art Carr / Winters Shifter Assemblies |
| Transmission Compatibility | Application Dependent / Requires Compatible Park-Equipped Shifter |
| Electrical Connection | Starter Control Circuit |
| Wiring Configuration | Start Switch to Park Safety Switch to Starter Control Circuit |
| Mounting | Shifter-Mounted |
| Installation Type | Electrical Starter Interlock Installation |
| Mounting Hardware | Included |
| Primary Application | Off-Road Racing & Custom Vehicle Starting Safety |
| Quantity | (1) Park Safety Switch Kit |
Fitment
Designed for compatible Winters automatic shifters equipped with a Park position and provisions for a Park Safety Switch.
| Manufacturer | Shifter Series | Application |
|---|---|---|
| Winters Performance | SideWinder Standard Pattern | Compatible Park-Equipped Automatic Shifters |
| Winters Performance | SideWinder Reverse Pattern | Compatible Park-Equipped Automatic Shifters |
| Art Carr / Winters | SideWinder Automatic Shifters | Verify Switch Mounting Compatibility |
Best Suited For:
- Rock Crawlers & Rock Bouncers
- Ultra4 Race Vehicles
- Custom Tube-Chassis Buggies
- Off-Road Trail Rigs
- Race Vehicles with Compatible Winters Shifters
Fitment & Installation Notes:
- Requires a compatible Winters automatic shifter with a Park position.
- Verify the shifter has the correct switch mounting provisions.
- Designed to interrupt the starter control circuit when the shifter is outside Park.
- Install according to the applicable Winters wiring instructions.
- Confirm the switch permits cranking only in Park after installation.
- Verify correct transmission linkage adjustment and shifter detent alignment.
- Not a replacement for the transmission's mechanical parking mechanism.
- Not a universal fit for all automatic or manual transmission shifters.
Builder Note: On a custom buggy, a properly functioning starter interlock is an important part of the electrical and drivetrain setup. Route the starter control circuit through the safety switch using the correct wiring and relay configuration, then verify the engine cannot crank in Reverse, Neutral, or any forward gear. Always confirm the transmission is fully engaged in Park before relying on the switch.
FAQ
What does the Winters Park Safety Switch do?
The Winters Park Safety Switch prevents the starter from operating unless the compatible shifter is in Park. It provides an electrical starting interlock to help prevent accidental engine cranking while the transmission is in gear.
Will this safety switch fit my Winters SideWinder shifter?
The kit is intended for compatible Winters SideWinder automatic shifters equipped with the required Park position and switch mounting provisions. Verify the specific shifter model before ordering.
Does the Park Safety Switch allow starting in Neutral?
No. This Park-only switch configuration is designed to permit engine cranking only when the shifter is in Park. It is different from a conventional Park/Neutral safety switch that allows starting in either position.
How is the Winters Park Safety Switch wired?
The switch is installed in the starter control circuit so that the start signal can reach the starter relay or solenoid only when the shifter is in Park. Follow the manufacturer's wiring instructions and use the appropriate circuit protection and relay configuration.
Will this switch prevent my buggy from rolling?
No. The Park Safety Switch controls engine cranking and does not physically lock the transmission or hold the vehicle stationary. The transmission's parking mechanism and vehicle braking system remain responsible for preventing movement.
Can this switch be used with an Art Carr shifter?
Some Art Carr shifters use Winters components and may accept the Park Safety Switch Kit. Confirm the exact shifter model and switch mounting arrangement before ordering.
Is the Park Safety Switch recommended for rock bouncers and Ultra4 vehicles?
A properly installed starter interlock is a useful safety feature for high-horsepower off-road vehicles. This kit is intended for compatible Winters shifter installations used in rock crawling, rock bouncing, and off-road racing.
What should I check after installation?
Verify that the starter operates only when the shifter is fully in Park. Check switch adjustment, electrical connections, transmission linkage, and every shifter position before operating the vehicle.
