Yukon Dana Super 60 Master Overhaul Kit for 17+ Ford Super Duty Front Axles
YK D60SR
The Yukon Master Overhaul Kit for 2017+ Ford Super Duty Dana Super 60 Front Axles includes the bearings, races, seals, shims, and installation hardware needed to rebuild your front differential or install a new ring and pinion gear set. Designed for Dana Super 60 front axles with a 28-spline pinion, this kit provides the major service components for compatible Ford F-250, F-350, F-450, and F-550 Super Duty trucks.
Whether you're replacing worn bearings, fixing differential noise, or changing gear ratios, having the correct setup components makes the job easier and helps avoid premature gear wear. This Yukon kit includes premium Timken bearings and races, inner axle seals, and the hardware needed to properly set bearing preload, backlash, and gear contact pattern. It's a practical choice for heavy-duty trucks used for towing, work, snow plowing, and off-road driving.
Includes:
- Carrier Bearings & Races
- Pinion Bearings & Races
- Inner Axle Seals
- Pinion Seal
- Complete Shim Kit
- Ring Gear Bolts
- Pinion Nut
- Crush Sleeve
- Oil Baffles & Slingers
- Thread Locker
- Gear Marking Compound with Brush
- Gasket & Installation Components
Specifications
| Manufacturer | Yukon Gear & Axle |
|---|---|
| Product Type | Master Differential Overhaul Kit |
| Axle Platform | Dana Super 60 |
| Vehicle Platform | Ford Super Duty |
| Model Years | 2017+ |
| Axle Position | Front |
| Pinion Spline Count | 28-Spline |
| Bearing Manufacturer | Timken |
| Carrier Bearings & Races | Included |
| Pinion Bearings & Races | Included |
| Inner Axle Seals | Included |
| Pinion Seal | Included |
| Differential Shims | Included |
| Ring Gear Bolts | Included |
| Pinion Nut | Included |
| Crush Sleeve | Included |
| Gear Marking Compound | Included |
| Thread Locker | Included |
| Installation Type | Internal Differential Rebuild / Gear Installation |
| Primary Application | Front Differential Rebuild & Ring and Pinion Installation |
Fitment
Designed for 2017 and newer Ford Super Duty trucks equipped with the Dana Super 60 front differential and 28-spline pinion. Verify your installed axle before ordering.
| Make | Model | Year Range | Axle Application |
|---|---|---|---|
| Ford | F-250 Super Duty | 2017+ | Dana Super 60 Front |
| Ford | F-350 Super Duty | 2017+ | Dana Super 60 Front |
| Ford | F-450 Super Duty | 2017+ | Dana Super 60 Front |
| Ford | F-550 Super Duty | 2017+ | Dana Super 60 Front |
Fitment Notes:
- Fits compatible Dana Super 60 front differentials
- Designed for 2017+ Ford Super Duty applications
- Requires 28-spline pinion configuration
- Front axle applications only
- Suitable for differential bearing replacement, rebuilding, and ring and pinion installations
- Verify axle identification and pinion spline count before ordering
- Not intended for older Dana 60 front axle configurations
FAQ
What Ford Super Duty trucks does this master overhaul kit fit?
This kit is designed for compatible 2017+ Ford F-250, F-350, F-450, and F-550 Super Duty trucks equipped with the Dana Super 60 front axle and 28-spline pinion. Verify the axle model before ordering, as equipment can vary by vehicle configuration.
Does this Yukon overhaul kit include Timken bearings?
Yes. The kit includes premium Timken carrier bearings, pinion bearings, and matching races. These components are important for maintaining proper differential alignment and long-term gear reliability.
Are inner axle seals included?
Yes. Inner axle seals and the pinion seal are included, allowing worn seals to be replaced while the differential is disassembled.
Should I use a master overhaul kit when installing new ring and pinion gears?
Yes. We recommend replacing bearings, races, seals, and setup components during a gear change, especially on a high-mileage or heavily used axle. A master overhaul kit provides the parts needed to establish proper preload, backlash, and gear contact pattern during installation.
Will this kit fit older Ford Dana 60 front axles?
No. This kit is designed for the 2017+ Dana Super 60 front axle configuration with a 28-spline pinion. Older Dana 60 axles may use different bearings, seals, and pinion components.
Does this kit include ring and pinion gears?
No. This is a differential overhaul and installation kit. Ring and pinion gears are purchased separately, allowing you to select the correct gear ratio for your truck and intended use.