Winters GM 4L80E Shift Linkage Kit 1495 for Sidewinder Shifters
1495
The Winters Performance GM 4L80E Sidewinder Shift Linkage Kit 1495 connects a Winters Sidewinder shifter cable to the shift shaft on a GM 4L80E automatic transmission. The linkage arm replaces the factory shift arm, and the cable bracket mounts at the transmission pan to hold the cable housing in position. As the cable moves, it turns the linkage arm to select the gear.
Use Kit 1495 for a new installation with a Winters 187-1 or 187-1B Sidewinder shifter, or to replace missing or damaged transmission-side linkage on an existing setup. The kit supplies the 4L80E-specific arm, bracket, and attachment hardware so you can retain your existing shifter and cable.
Includes:
- (1) Linkage Arm – P/N 4011
- (1) Cable Bracket – P/N 4944
- (1) Hardware Kit – P/N 6062
Note: The Winters Sidewinder shifter and push-pull cable are sold separately.
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Winters Performance |
| Install Kit Part Number | 1495 |
| Product Type | Transmission-side shift linkage kit |
| Transmission Compatibility | GM 4L80E automatic |
| Compatible Shifters | Winters Sidewinder P/N 187-1 and 187-1B |
| Linkage Arm | P/N 4011 |
| Cable Bracket | P/N 4944 |
| Hardware Kit | P/N 6062 |
| Bracket Mounting Location | Two transmission pan bolt locations |
Fitment
Designed For:
- GM 4L80E automatic transmissions equipped with a Winters Turbo-Hydro 4L80E Sidewinder shifter, P/N 187-1 or 187-1B.
Fitment Notes:
- Match both the transmission model and the Winters shifter part number when selecting replacement linkage.
- The cable bracket fits under two transmission pan bolts. Check that the bolts are long enough with the bracket in place.
- Route the cable with as few bends as practical for smooth shifter operation.
Download the Winters Kit 1495 installation instructions and parts diagram (PDF)
FAQ
Can I keep the factory 4L80E shift arm?
Winters specifies replacing the factory arm with linkage arm P/N 4011. The cable end connects to the ball joint on this arm so the Sidewinder can operate the transmission shift shaft.
Does Kit 1495 include the shifter cable?
The shifter and cable are sold separately. Kit 1495 includes the parts that attach the cable to the transmission: the linkage arm, cable bracket, and hardware kit.
How do I check that the shifter and transmission positions match?
With the Sidewinder in Park, the transmission linkage arm should be fully forward. Then check each shifter position against the corresponding transmission detent. If the positions do not line up, use the threaded quick-disconnect at the cable end to adjust the linkage as shown in the Winters instructions.
