Winters TF 727 / AMC Shift Linkage Kit 2095
Winters TF 727 / AMC Shift Linkage Kit 2095

Winters TF 727 / AMC Shift Linkage Kit 2095

2095

Regular price$43.97
/
Shipping calculated at checkout.


The Winters Performance TF727 Sidewinder Shift Linkage Kit 2095 connects a Winters Sidewinder shifter cable to a Chrysler TorqueFlite 727 (TF-8) automatic transmission in Mopar and AMC applications. The cable bracket anchors the cable housing at the transmission pan. As the cable moves, the pivot arm and connecting rod transfer that movement to the linkage arm on the transmission shift shaft.

Use Kit 2095 when installing a compatible Sidewinder on a TF727 or replacing missing or worn transmission-side linkage. The same kit fits the standard-pattern and reverse-pattern Winters 207-series shifters listed below, including their lockout versions. Once installed, adjust the cable so each shifter position lines up with the corresponding transmission detent.

Includes:

  • Linkage arm – P/N 2033
  • Ball joint assembly – P/N 2024
  • Pivot arm – P/N 2035
  • Pivot bolt – P/N 2034
  • Cable bracket – P/N 2032
  • Hardware kit – P/N 6062
  • Additional mounting and pivot hardware listed in the parts diagram: 1/4-20 x 1-1/2 in. hex-head cap screw, 1/4 in. washer, 1/4-20 nut, jam nut, wave washer, flat washer, and cotter pin

Note: The Sidewinder shifter and push-pull cable are sold separately.


Specifications
Specification Details
Manufacturer Winters Performance Products
Part Number 2095
Product Type Transmission-side shift linkage and installation kit
Transmission Chrysler TorqueFlite 727 (TF727 / TF-8)
Applications Mopar and American Motors (AMC) with a TF727
Shifter Type Winters Sidewinder cable-operated shifter
Cable Bracket Mount Two transmission pan bolt locations

Fitment

Designed For: Mopar and AMC applications pairing a TorqueFlite 727 transmission with one of the following Winters Sidewinder shifters.

Winters Shifter P/N Shift Pattern
207-1 Standard pattern
207-1B Standard pattern with lockout
207-2 Reverse pattern
207-2B Reverse pattern with lockout

Fitment Notes:

  • For a transmission swap, identify the installed transmission and check the shifter part number before ordering.
  • For a TorqueFlite 904 or 999 (TF-6), Winters lists Kit 2795. That kit uses a different cable bracket and ball joint assembly.
  • When installing the cable bracket, check that the two pan bolts are long enough with the bracket in place.

Download the Winters Kit 2095 installation instructions and parts diagram (PDF)


FAQ

Does Kit 2095 fit an AMC TorqueFlite 727?

Yes. Winters lists Kit 2095 for American Motors TF727 applications using a compatible 207-series Sidewinder. Check both the transmission and shifter part number, especially if the vehicle has had a drivetrain swap.

Do I need a different linkage kit for a reverse-pattern Sidewinder?

Kit 2095 fits both reverse-pattern models, P/N 207-2 and 207-2B, as well as the standard-pattern 207-1 and 207-1B. The linkage connects the cable to the transmission. Your shifter and transmission still need matching shift patterns.

Does the rod in the product photo replace the shifter cable?

No. The short connecting rod joins the pivot arm to the transmission linkage arm. A separate push-pull cable runs from the Sidewinder shifter to the pivot arm, with the cable housing secured at the supplied bracket.

What is the difference between P/N 2095 and P/N 6062?

P/N 2095 is the complete TF727 linkage kit. P/N 6062 is the hardware kit identified as item 12 in the diagram. Order 2095 if you need the linkage arm, pivot assembly, and cable bracket along with the hardware.