Yukon Dana 60 & Dana 61 Master Overhaul Kit - Rear Differential
YUKYK D60-R
This Dana 60 and Dana 61 rear master overhaul kit is designed for servicing worn bearings, seals, preload components, and setup hardware. This kit provides the critical internal components needed to properly rebuild Dana 60 rear differentials used in towing, racing, off-road, and high-load drivetrain applications.
Dana 60 rear axles have been used across a wide range of Ford, Dodge, Chevrolet, GMC, Jeep, and Plymouth platforms because of their strength, large ring gear size, and high torque capacity. This kit includes Timken bearings and races along with installation hardware and setup components needed during gear installation or differential overhaul service.
Includes:
- Carrier bearings and races
- Pinion bearings and races
- Pinion seal
- Complete shim kit
- Ring gear bolts
- Pinion nut
- Crush sleeve
- Oil baffles and slingers
- Thread locker
- Gear marking compound with brush
- Differential gasket
Specifications
- Fits Dana 60 and Dana 61 rear differentials
- Designed for rear axle applications
- Timken bearings and races included
- Includes preload and shim setup components
- Includes ring gear bolts and pinion hardware
- Designed for complete differential rebuilds
- Compatible with standard rotation Dana rear axle applications
- Fits multiple spline and housing variations depending on application
-
Suitable for Street, Towing, Off-Road, Racing, and Restoration Applications
Fitment
|
Make |
Model |
Year Range |
|
Chevrolet |
C10 Pickup |
1967–1972 |
|
Chevrolet |
C20 Pickup |
1964–1972 |
|
Chevrolet |
Express 2500 |
2003–2009 |
|
Chevrolet |
Express 3500 |
2003–2009 |
|
Chevrolet |
G30 |
1979–1987 |
|
Chevrolet |
K10 Pickup |
1967–1972 |
|
Dodge |
Ram 2500 |
1994–2002 |
|
Dodge |
Ram 3500 Van |
1999–2003 |
|
Dodge |
W250 |
1981–1993 |
|
Dodge |
W350 |
1981–1993 |
|
Ford |
E-250 |
2003–2014 |
|
Ford |
E-350 Super Duty |
2000–2015 |
|
Ford |
E-450 Super Duty |
2000–2008 |
|
Ford |
F-250 |
1954–1986 |
|
Ford |
F-350 |
1975–1978 |
|
GMC |
K3500 |
1979–1986 |
|
GMC |
Savana 2500 |
2003–2013 |
|
GMC |
Savana 3500 |
2003–2010 |
|
Jeep |
Wagoneer |
1963–1976 |
|
Plymouth |
Barracuda |
1968–1974 |
|
Plymouth |
Road Runner |
1968–1975 |
Fitment Notes:
- Fits Dana 60 and select Dana 61 rear differential applications
- Intended for rear axle assemblies only
- Some early applications use 16 spline configurations
- Verify axle type, spline count, and carrier configuration before ordering
- Compatible with truck, van, commercial, and muscle car Dana rear axle applications
Tech Insight
Does this kit include everything needed to install new gears?
This kit includes the bearings, races, seals, shims, hardware, crush sleeve, marking compound, and setup components commonly required when installing new ring and pinion gears. Ring and pinion gears are sold separately.
Will this fit both Dana 60 and Dana 61 rear axles?
Yes. This master overhaul kit is designed for Dana 60 and Dana 61 rear differential applications using the corresponding bearing and seal configuration.
Are Timken bearings included?
Yes. This kit includes premium Timken carrier bearings, pinion bearings, and races for long-term durability and reliability.
When should I replace my differential bearings?
Bearing replacement is recommended whenever installing new gears, rebuilding a differential, or when bearing wear, excessive noise, metal contamination, or high mileage is present.
Do I need to check the gear pattern during installation?
Yes. Proper pinion depth, backlash, bearing preload, and gear tooth contact pattern should always be verified during installation to ensure quiet operation and long gear life.
