Spicer 1350 1.5" x 10-Spline Yoke - U-Bolt Style
WF03003-S
The Spicer 1350 Series 1.5" 10-Spline Yoke – WOD U-Bolt Modified gives builders a compact 1350-series yoke for custom driveshaft and carrier bearing systems using a 1.500" 10-spline shaft. Wide Open Design machines the Spicer yoke for U-bolt retention instead of the original strap-style hardware, creating a secure, serviceable U-joint connection for trail rigs, Jeeps, lightweight buggies, and recreational off-road builds.
Designed to work with the WOD Single Ended Carrier Bearing, this yoke is one of three available driveline options alongside 1410 and 1480 series components. The 1350 version uses a 3.625" U-joint width, 1.188" bearing caps, and provides a maximum joint angle of 22.5°, making it a strong fit where compact packaging and proven 1350-series driveline components are the priority.
Includes:
- (1) Spicer 1350 Series Yoke
- 1.500" 10-Spline Bore
- Wide Open Design U-Bolt Modification
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Spicer / Wide Open Design |
| Product Type | Driveshaft Yoke |
| U-Joint Series | 1350 |
| Spline Major Diameter | 1.500" |
| Spline Count | 10-Spline |
| Spline Type | Parallel |
| U-Joint Retention | U-Bolt |
| WOD Modification | Machined for U-Bolt Retention |
| U-Joint Bearing Cap Diameter | 1.188" |
| U-Joint Retaining Width | 3.625" |
| Maximum Joint Angle | 22.5° |
| Ground Hub Diameter | 1.810" |
| Length Through Bore | 2.000" |
| Joint Centerline to End of Spline | 3.695" |
| Primary Application | 1350-Series Custom Driveshaft & Carrier Bearing Systems |
Fitment
Best Suited For:
- WOD Single Ended Carrier Bearing systems
- 1350-series driveshafts
- Carrier bearing and intermediate shafts
- Multi-piece driveshaft systems
- Jeep and trail-rig driveline builds
- Recreational rock crawlers
- Lightweight off-road buggies
- Custom chassis vehicles
Fitment Requirements:
- 1.500" major diameter, 10-spline shaft
- 1350-series U-joint
- 1.188" U-joint bearing cap diameter
- 3.625" U-joint retaining width
- U-bolt style U-joint retention
Fitment Notes:
- Compatible with the WOD Single Ended Carrier Bearing.
- Maximum specified joint angle is 22.5°.
- Verify shaft spline diameter and spline count before ordering.
- Check driveshaft operating angle throughout the complete suspension travel of the vehicle.
FAQ
What shaft does this 1350 yoke fit?
This yoke is designed for a shaft with a 1.500" spline major diameter and 10 parallel splines. Verify both dimensions before ordering for a custom driveline application.
What U-joint does this yoke require?
This yoke uses a standard 1350-series U-joint with a 1.188" bearing cap diameter and 3.625" retaining width.
Will this yoke fit the WOD Single Ended Carrier Bearing?
Yes. This yoke is compatible with the WOD Single Ended Carrier Bearing and can be used when building a 1350-series carrier bearing or intermediate shaft assembly.
Why does Wide Open Design machine this yoke for U-bolts?
Wide Open Design machines the Spicer yoke for U-bolt retention instead of the original strap-style configuration. This is the retention style we use for heavy-duty custom off-road driveline systems.
What WOD driveline kits work with this yoke?
This yoke can be used with the WOD 1350 Carrier Bearing Shaft Builder Kit and WOD 1350 Driveshaft Builder Kit when building a complete 1350-series driveline system.
