Spicer 1410 1.5" x 10-Spline Yoke - U-Bolt Style
WF03006-S
The Spicer 1410 Series 1.5" 10-Spline Yoke – WOD U-Bolt Modified gives builders a heavy-duty 1410-series yoke for custom driveshaft and carrier bearing systems using a 1.500" 10-spline shaft. Wide Open Design machines the Spicer yoke for U-bolt retention instead of the original strap-style hardware, providing a secure U-joint connection for off-road driveline applications.
Designed to work with the WOD Single Ended Carrier Bearing, this yoke allows the same carrier bearing system to be configured around 1350, 1410, or 1480 driveline components. The 1410 version combines a 4.188" U-joint width with a 30° maximum joint angle, making it a strong choice for rock crawlers, buggies, intermediate shafts, and multi-piece driveshaft systems.
Includes:
- (1) Spicer 1410 Series Yoke
- 1.500" 10-Spline Bore
- Wide Open Design U-Bolt Modification
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Spicer / Wide Open Design |
| Product Type | Driveshaft Yoke |
| U-Joint Series | 1410 |
| Spline Major Diameter | 1.500" |
| Spline Count | 10-Spline |
| Spline Type | Parallel |
| U-Joint Retention | U-Bolt |
| WOD Modification | Machined for U-Bolt Retention |
| U-Joint Bearing Cap Diameter | 1.188" |
| U-Joint Retaining Width | 4.188" |
| Maximum Joint Angle | 30° |
| Ground Hub Diameter | 2.312" |
| Length Through Bore | 2.000" |
| Joint Centerline to End of Spline | 3.688" |
| Counterbore Depth | 0.000" |
| Primary Application | 1410-Series Custom Driveshaft & Carrier Bearing Systems |
Fitment
Best Suited For:
- WOD Single Ended Carrier Bearing systems
- 1410-series driveshafts
- Carrier bearing and intermediate shafts
- Multi-piece driveshaft systems
- Rock crawlers and off-road buggies
- Custom tube chassis vehicles
Fitment Requirements:
- 1.500" major diameter, 10-spline shaft
- 1410-series U-joint
- 1.188" U-joint bearing cap diameter
- 4.188" U-joint retaining width
- U-bolt style U-joint retention
Fitment Notes:
- Compatible with the WOD Single Ended Carrier Bearing.
- Maximum specified joint angle is 30°.
- Verify shaft spline diameter and spline count before ordering.
- Check driveshaft operating angle throughout the complete suspension travel of the vehicle.
FAQ
What shaft does this 1410 yoke fit?
This yoke is designed for a shaft with a 1.500" spline major diameter and 10 parallel splines. Verify both the spline diameter and count before ordering.
What U-joint does this yoke require?
This yoke is designed for a 1410-series U-joint with a 1.188" bearing cap diameter and 4.188" retaining width.
Will this yoke fit the WOD Single Ended Carrier Bearing?
Yes. This yoke is designed to work with the WOD Single Ended Carrier Bearing. The carrier bearing system can be configured with compatible 1350, 1410, or 1480 yokes depending on the driveline being built.
Why does Wide Open Design machine this yoke for U-bolts?
Wide Open Design machines the Spicer yoke for U-bolt retention instead of the original strap-style configuration. This is the retention style we use when building heavy-duty custom off-road driveline systems.
What WOD driveline kits work with this yoke?
This yoke can be used with the WOD 1410 Carrier Bearing Shaft Builder Kit and WOD 1410 Driveshaft Builder Kit when building a complete 1410-series driveline system.
